Troubleshooting Whirlpool Washer Error E01 F03

Troubleshooting Whirlpool Washer Error E01 F03

Whirlpool washers display the error code E01 F03 when there is a problem with the water level sensor. This sensor is responsible for detecting the amount of water in the washer and sending a signal to the control board. If the sensor is not working properly, the washer may not be able to fill with enough water or may not be able to drain properly.

Here are some troubleshooting tips for Whirlpool washer error E01 F03:

1. Check the water level sensor hose. The hose is located on the back of the washer and connects the sensor to the control board. Make sure the hose is not kinked or clogged.
2. Check the water level sensor. The sensor is located on the bottom of the washer and is attached to the tub. Use a multimeter to test the sensor for continuity. If the sensor is not working properly, it will need to be replaced.

Question 1: What are the symptoms of Whirlpool washer error E01 F03?

Answer: The washer may not fill with enough water or may not drain properly. The washer may also display the error code E01 F03 on the control panel.

Question 2: What are the possible causes of Whirlpool washer error E01 F03?

Answer: The possible causes include:

• A kinked or clogged water level sensor hose
• A faulty water level sensor
• A problem with the control board

Conclusion:

If you are experiencing Whirlpool washer error E01 F03, you can try troubleshooting the problem yourself by checking the water level sensor hose and sensor. If you are unable to fix the problem, you will need to contact a qualified technician.