Whirlpool Calypso Washer Error OB Diagnosis

If you own a Whirlpool Calypso washer, you may occasionally encounter an error code OB displayed on the control panel. This error code is an indication of a problem with the washer's out-of-balance condition. In such cases, the washer may not function properly, and it may even stop mid-cycle.

Diagnosing the cause of the OB error code is crucial to resolve the issue and get your washer back to working order. Here are some steps to help you diagnose the possible causes:

1. Check for Overloading

The most common cause of the OB error code is overload. Make sure that you have not loaded the washer beyond its capacity. Overloading can lead to an imbalance during the spin cycle, triggering the OB error. Remove some items from the washer if necessary.

2. Inspect for Obstructions

Another reason for the OB error code is the presence of obstructions inside the washer. Check the drum and the drain pump for any foreign objects, such as clothing items, debris, or even small articles that might have fallen into the washer. Remove any obstructions to prevent imbalance during operation.

3. Inspect Suspension System

The Calypso washer is equipped with a suspension system that helps maintain balance during cycles. Inspect the suspension rods, springs, and dampening straps to ensure they are in good condition. If any of these components are damaged or broken, it can result in an imbalance and trigger the OB error code.

4. Level the Washer

In some cases, the washer may not be properly leveled, leading to an imbalance. Use a bubble level to check if the washer is sitting evenly on the floor. Adjust the washer's legs as needed to achieve proper leveling. A poorly leveled washer can cause continuous triggering of the OB error code.

5. Calibrate the Control Board

If none of the above steps resolve the OB error code, it may be necessary to recalibrate the washer's control board. This is a more advanced troubleshooting step, and you may need to consult the user manual or seek professional assistance to carry out the calibration process.

Remember to always disconnect the washer from the power source before attempting any diagnostics or repairs. If you're unsure or uncomfortable with any step, it's always best to seek professional help to avoid any potential hazards.

It is essential to address the OB error code promptly to prevent further damage to your Whirlpool Calypso washer. By following the diagnostic steps mentioned above, you can identify and resolve the cause behind the OB error, ensuring that your washer operates smoothly and efficiently.