Whirlpool Calypso Washer OB Error Solution

If you own a Whirlpool Calypso washer and are facing an OB error, don't worry! This article will guide you through some effective solutions to help resolve the issue and get your washer back to working condition.

Understanding the OB Error

The OB error code on your Whirlpool Calypso washer stands for "Out of Balance." This error occurs when the washer senses that the load inside the drum is not balanced properly. It can prevent the washer from spinning, causing disruption in your laundry routine.

Solution 1: Rearrange the Load

The first solution to try is rearranging the load inside the washer. Unplug the appliance and carefully redistribute the items evenly. Make sure that the weight inside the drum is distributed symmetrically around the center. Avoid placing all heavy items on one side of the drum, as this can cause an imbalance during the spin cycle.

Solution 2: Check for Obstructions

Another common cause of the OB error is obstructions that interfere with the washer's motion. Check for any items, such as garments or foreign objects, that might have gotten stuck between the drum and the walls of the washer. Remove any obstructions you find, and then attempt running the washer again to see if the error persists.

Solution 3: Inspect the Suspension Springs

The OB error can also occur if the suspension springs of your Calypso washer are worn out or broken. These springs help maintain the balance of the drum during operation. If you suspect this is the issue, carefully inspect the springs for any signs of damage or wear. If necessary, replace the worn-out springs with new ones to restore proper balance.

Solution 4: Calibrate the Sensor

In some cases, the OB error may occur due to a faulty sensor that misreads the balance of the load. To fix this, you can try calibrating the sensor. Consult the user manual or Whirlpool's official website for instructions on calibrating the sensor for your specific Calypso washer model.

Solution 5: Professional Service

If none of the above solutions work, it is recommended to seek professional assistance. Whirlpool-certified technicians have the expertise to diagnose and resolve complex issues related to your Calypso washer. Contact Whirlpool customer support or schedule a visit from a qualified technician to get personalized assistance.

By following these solutions, you can potentially resolve the OB error on your Whirlpool Calypso washer without much difficulty. Remember to always prioritize your safety and refer to the user manual for specific instructions related to your appliance model.