How to fix thermal fuse issue in GE dishwasher?

Question

How to fix thermal fuse issue in GE dishwasher?

Learn how to troubleshoot and fix a thermal fuse issue in your GE dishwasher with our step-by-step guide. Keep your appliance running smoothly.

Subject: GE - Sub Subject: Troubleshooting thermal fuse in GE dishwasher
Date: 1/3/2024 Status: SOLVED
2 answered / 1 voted, viewed icon

81 viewed.

score 79 · Accepted Answer

How to Fix Thermal Fuse Issue in GE Dishwasher

Thermal fuse issue in a GE dishwasher can be a common problem that can lead to the appliance not working properly. Fortunately, fixing this issue is relatively straightforward and can be done at home without the need for professional assistance.

1. Safety First

Before attempting to fix the thermal fuse issue in your GE dishwasher, ensure you prioritize safety. Turn off the dishwasher's power supply by unplugging it or switching off the circuit breaker connected to the dishwasher.

2. Access the Thermal Fuse

To access the thermal fuse, you'll need to remove the dishwasher's front panel. Typically, this involves removing a series of screws located around the edges of the panel. Once the screws are removed, gently pull the front panel away from the dishwasher to gain access to the inner components.

3. Locate the Thermal Fuse

The thermal fuse is a small device usually located on or near the control board. It is a safety component that prevents the dishwasher from overheating. The fuse typically has two wires connected to it.

4. Test the Thermal Fuse

Using a multimeter, set it to the resistance mode and test the thermal fuse for continuity. Place one probe on each terminal of the fuse and check if the multimeter displays a reading close to zero ohms. If the multimeter shows an infinite reading, it indicates that the fuse is blown and needs to be replaced.

5. Replace the Thermal Fuse

If the thermal fuse is indeed blown, it needs to be replaced. Obtain a compatible thermal fuse from an appliance parts store or an authorized GE dealer. Disconnect the wires connected to the thermal fuse and remove it from its mounting location. Install the new fuse by connecting the wires properly and securing it in place.

6. Reassemble and Test

Once you have replaced the thermal fuse, reassemble the dishwasher by placing the front panel back in its original position and securely fastening the screws. Restore the power supply by plugging the dishwasher back in or turning on the circuit breaker.

Test the dishwasher by running a cycle to ensure that it now functions properly without any issues related to the thermal fuse. If the dishwasher still does not work or if the thermal fuse blows again, it may be advisable to seek professional assistance.

Conclusion

Fixing a thermal fuse issue in a GE dishwasher can usually be done at home by following the steps outlined above. However, if you are not confident in your abilities or the problem persists, it is recommended to contact a professional technician who specializes in dishwasher repairs.

How to fix thermal fuse issue in GE dishwasher?