Error Ld, WHIRLPOOL Calypso Washing Machine [WHIRLPOOL]

Error Ld, WHIRLPOOL Calypso Washing Machine

Failure Code: Ld, WHIRLPOOL Calypso Washing Machine. Condition: Long Drain

Subject: WHIRLPOOL - Sub Subject: Calypso Washing Machine
Date: 4/13/2019 Status: ACTIVE

Viewed

5 times.

ANSWERS Write an Answer

❝Error Ld, WHIRLPOOL Calypso Washing Machine❞ answers. technician asked first. Total 2 replies.

technician - 4/13/2019 5:22:20 PM

Failure Code: Ld

Condition: Long Drain

Check/Repair:
Ld flashes if it takes longer than 5 minutes to pump out water to a point where the operating pressure switch resets.
Press STOP/CANCEL to clear the display.

Did you find this helpful? like icon

Askme - 3/8/2020 3:12:03 AM

What does Ld mean on a Whirlpool washing machine?

WHIRLPOOL / Calypso Washing Machine A Whirlpool washer that displays an "LD" error is indicating that there is an issue with "long draining." This means that the washer is taking too long to drain the water from the drum. The most logical reason for this is a malfunction in the pump.

Did you find this helpful? like icon

Similar Questions

My Breville microwave not heat anything

Hi i have a Breville microwave, all the functions are working as normal but my food is not getting hot at all, I dont understand microwaves but would love to be able fix it myself, can you help me with the diagnosis please?

Breville / Microwave Answers: 0 7

How do I fix H2O error code on GE dishwasher?

How do I fix H2O error code on GE dishwasher: Indicates a low water situation. If H2O only appears during 1-Hour Wash, schedule service. Feel free to run any other cycle until that update is done.

GE / Dishwasher Answers: 1 235

How do I fix 999 error code on GE dishwasher?

How do I fix 999 error code on GE dishwasher; Possible leak detected on models with “Floor Protect with Alert” feature. All others: The unit’s control needs to be reset.

GE / Dishwasher Answers: 1 47

How do I fix Leak Detected error code on GE dishwasher?

How do I fix Leak Detected error code on GE dishwasher; Possible leak is detected. The cycle will be cancelled on models with leak detection. If LEAK DETECTED is displayed, contact service.

GE / Dishwasher Answers: 1 38

How do I fix C8 error code on GE dishwasher?

How do I fix C8 error code on GE dishwasher; This display indicates that the detergent cup is blocked from opening fully. Remove obstruction (i.e. silverware, pan). Relatch door and wait 30 seconds for cup to open.

GE / Dishwasher Answers: 1 38

How do I fix C7 error code on GE dishwasher?

How do I fix C7 error code on GE dishwasher; The dishwasher’s water temperature sensor circuit has become inoperative. Disconnect the power at the circuit breaker for about 30 seconds and then reset the dishwasher.

GE / Dishwasher Answers: 1 16

How do I fix C6 error code on GE dishwasher?

How do I fix C6 error code on GE dishwasher; Water temperature is too low. Water temperature coming into the dishwasher should be at least 120 degrees F. Run the faucet adjacent to the dishwasher prior to starting the dishwasher to purge any cold water from the line. Adjust the water heater tem

GE / Dishwasher Answers: 1 15

How do I fix C5 error code on GE dishwasher?

How do I fix C5 error code on GE dishwasher; The pump out time is too short. Make sure that the water supply is turned on. Try the same cycle again. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front left corner of the floor of t

GE / Dishwasher Answers: 1 12

How do I fix C4 error code on GE dishwasher?

How do I fix C4 error code on GE dishwasher; Machine filled twice after a power failure. Float switch stuck or failed. Clogged drain or sump. Touch start and then cancel/reset. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front l

GE / Dishwasher Answers: 1 25

Tepte